A processing aid for modelling and reproducing the dispersion layer by Signum composite, matrix and Signum ceramis. Excellent for making it much less difficult to model or adapt light-curing veneering materials. After being brushed onto the composite, Signum encourages easier placement and shaping, leaving you with an excellent shape and smooth surface
Features & Benefits
- Processing aid for modelling and reproducing the dispersion layer.
- Encourages easy placement and shaping
- Smoother surfaces, excellent morphology.
Product Details:
- 1 x 4ml bottle of Signum Liquid
FAQs:
Is Signum Liquid meant to be yellow?
When first applied, Signum Liquid can have a slight yellow colour, but this will quickly become transparent.
How do I use Signum Liquid?
Kulzer have provided the following instructions for using Signum Liquid:
- To make it easier to model or adapt light-curing veneering materials, the modelling tool or the brush are coated sparingly with Signum liquid.
- To restore a damaged dispersion layer, the surface to be conditioned is roughened with a coarse grain diamond.
- Blow off coarse dust with oil-free air. Fine dust particles that remain on the surface can affect the bonding and should be removed carefully with a clean brush with short, stiff bristles.
- At this stage, the oil and greasefree surface should not be steam-cleaned or touched. Coat the point of attachment with Signum liquid applied in a thin and broad layer using a disposable brush.
- Make sure to moisten the area thoroughly. Allow it to take effect for 30 seconds and do not polymerise.
- Apply the desired Signum components as usual
