The DentalPRO Aerosol helps to reduce the risk of cross contamination between dental staff and patients during treatment.
With a market leading airflow system to ensure optimum capture of aerosol extra-orally, it is designed to work alongside appropriate PPE and regular intra-oral suction. The DentalPRO Aerosol works to disrupt the directional airflow to filter aerosol direct from the patient, ejecting filtered air away from dental staff breathing zones.
It is simple to use and maintain, and there is no need to vent outside as the filtered air is sent back into the room following filtration. Its three-stage filtration includes a HEPA filter which removes 99.997% of particles at 0.3 microns.
Due to the large adjustable flow rate, the DentalPRO Aerosol may be used during a variety of procedures and can be turned to maximum capacity for applications that involve heavier aerosol generation. With a sleek design, this is an ideal addition to any dental setting, offering maximum protection and minimal interference.
Technology:-
Key Features:-
Three stage filtration - F8 Pre filter / HEPA / Gas filter Standard
Complete with filter condition indicator Standard
Low noise level Standard
Digital air flow control Standard
VOC Sensing (Volatile Organic Compound), Optional
Dimensions (HxWxD) 840 x 475 x 550mm (without arm / spigot)
Cabinet construction Powder coated mild steel
Blower Centrifugal turbine
Airflow 240m3/hr
Electronics 90 - 257v 1ph 50/60Hz Full load current: 12.5 amps
Noise level < 64dBA (at typical operating speed)
Weight 54kg
Arm size 50mm