3M RotoMix Capsule Mixing Unit is transitioning to Solventum Rotating Capsule Mixing Device.
A rotational/centrifugal capsule mixing unit that`s easy to use and optimizes physical properties of the materials by delivering a completely homogeneous mix while significantly reducing porosity.
- Easy loading and unloading of capsules
- Touchpad features both pre-programmed and programmable setting options for simple operation
- Typical mixing speed: 2850 rotations per minute
- Typical centrifuging speed: 2950 rotations per minute
- Extremely quiet operation
- Rotating platform with simultaneously counter-rotating capsule holder produces the most complete mix
- Automatic centrifugal cycle produces a denser mix and virtually void-free material.
Technical data:
- Drive unit: Ball-bearing motor with integrated self-resetting overheat cut-off
- Operating mode: Short-term operation, 2 min On/ 5 min Pause (to prevent needless motor heating)
- Controller: Microprocessor-controlled, high precision mixing time control by quartz timing mechanism
- Capsule holder: Self-locking
- Capsules: Diameter max.19 mm, total length max. 58 mm, length without tubes max. 38 mm, weight max. 6 g
- Housing: Housing and protective cover consist of high impact-resistant plastics
- Mixing speed: typically 2850 for 6 g-capsules
- Centrifugation speed: typically 2950 for 6 g-capsules
- Operating temperature: 18°C…40°C/64°F…104°F
- Humidity: max. 80% at 31°C/88°F, max. 50% at 40°C/104°F
- Main voltage: 120 V, 230 V, 50/60 Hz, for voltage setting refer to the rating plate
- Power requirements: 390 VA
- Fuses: 230 V: 2A time-lag fuse / 120 V: 3.2 A time-lag fuse
- Dimensions: (W x H x D) 180 x 210 x 250 mm
- Weight: 4000 g
76301
Please note: Product packaging may vary from photo shown due to the current rebranding project from 3M to Solventum. The performance and design of the products will remain unchanged
